Free Keyless Entry Remote Key Fob Programming Instructions Free Keyless Remote Fob Entry programming instructions, procedures for all automotive vehicles Obtain all remote transmitters for this vehicle. You will need two keys to perform this programming procedure. NOTE: the following procedure only programs the remote buttons. It does not program the key to start the car. You must have the key programmed at a dealer or locksmith.
1.Insert master key into the ignition switch and turn the ignition switch to the ON position.
2. Within 30 seconds: Insert 2nd key into the driver’s door lock cylinder and manually lock the driver’s door with the 2nd key.
3.Press the LOCK or UNLOCK button
4.After 2 seconds press the LOCK or UNLOCK button again
5.Switch ignition to the OFF position. Programming is now complete, test remote to ensure proper function