Obtain all remote transmitters for this vehicle. You will need two keys to perform this programming procedure. NOTE: the following procedure only programs the remote buttons. It does not program the key to start the car. You must have the key programmed at a dealer or locksmith.
1.Insert master key into the ignition switch and turn the ignition switch to the ON position.
2. Within 30 seconds: Insert 2nd key into the driver’s door lock cylinder and manually lock the driver’s door with the 2nd key.
3.Press the LOCK or UNLOCK button
4.After 2 seconds press the LOCK or UNLOCK button again
5.Switch ignition to the OFF position. Programming is now complete, test remote to ensure proper function